The shifting of a melody, a harmonic progression or an entire musical piece to another key, while maintaining the same tone structure, i.e. the same succession of whole tones and semitones and remaining melodic intervals.
For example, one might transpose an entire piece of music into another key. Similarly, one might transpose a tone row or an unordered collection of pitches such as a chord so that it begins on another pitch.
The transposition of a set A by n semitones is designated by Tn(A), representing the addition (mod 12) of an integer n to each of the pitch class integers of the set A. Thus the set (A) consisting of 0–1–2 transposed by 5 semitones is 5–6–7 (T5(A)) since 0 + 5 = 5, 1 + 5 = 6, and 2 + 5 = 7.
Scalar transpositions [ edit ]
In scalar transposition, every pitch in a collection is shifted up or down a fixed number of scale steps within some scale. The pitches remain in the same scale before and after the shift. This term covers both chromatic and diatonic transpositions as follows.
Chromatic transposition [ edit ]
Chromatic transposition is scalar transposition within the chromatic scale, implying that every pitch in a collection of notes is shifted by the same number of semitones. For instance, transposing the pitches C4–E4–G4 upward by four semitones, one obtains the pitches E4–G♯4–B4.
Diatonic transposition [ edit ]
Diatonic transposition is scalar transposition within a diatonic scale (the most common kind of scale, indicated by one of a few standard key signatures). For example, transposing the pitches C4–E4–G4 up two steps in the familiar C major scale gives the pitches E4–G4–B4. Transposing the same pitches up by two steps in the F major scale instead gives E4–G4–B♭4.
Pitch and pitch class transpositions [ edit ]
There are two further kinds of transposition, by pitch interval or by pitch interval class, applied to pitches or pitch classes, respectively. Transposition may be applied to pitches or to pitch classes. For example, the pitch A4, or 9, transposed by a major third, or the pitch interval 4:
while that pitch class, 9, transposed by a major third, or the pitch class interval 4:
Sight transposition [ edit ]
Although transpositions are usually written out, musicians are occasionally asked to transpose music "at sight", that is, to read the music in one key while playing in another. Musicians who play transposing instruments sometimes have to do this (for example when encountering an unusual transposition, such as clarinet in C), as well as singers' accompanists, since singers sometimes request a different key than the one printed in the music to better fit their vocal range (although many, but not all, songs are printed in editions for high, medium, and low voice).
There are three basic techniques for teaching sight transposition: interval, clef, and numbers.
Interval [ edit ]
First one determines the interval between the written key and the target key. Then one imagines the notes up (or down) by the corresponding interval. A performer using this method may calculate each note individually, or group notes together (e.g. "a descending chromatic passage starting on F" might become a "descending chromatic passage starting on A" in the target key).
Clef [ edit ]
Clef transposition is routinely taught (among other places) in Belgium and France. One imagines a different clef and a different key signature than the ones printed. The change of clef is used so that the lines and spaces correspond to different notes than the lines and spaces of the original score. Seven clefs are used for this: treble (2nd line G-clef), bass (4th line F-clef), baritone (3rd line F-clef or 5th line C-clef, although in France and Belgium sight-reading exercises for this clef, as a preparation for clef transposition practice, are always printed with the 3rd line F-clef), and C-clefs on the four lowest lines; these allow any given staff position to correspond to each of the seven note names A through G. The signature is then adjusted for the actual accidental (natural, sharp or flat) one wants on that note. The octave may also have to be adjusted (this sort of practice ignores the conventional octave implication of the clefs), but this is a trivial matter for most musicians.
Numbers [ edit ]
Transposing by numbers means, one determines the scale degree of the written note (e.g. first, fourth, fifth, etc.) in the given key. The performer then plays the corresponding scale degree of the target chord.
Transpositional equivalence [ edit ]
Two musical objects are transpositionally equivalent if one can be transformed into another by transposition. It is similar to enharmonic equivalence and octave equivalence. In many musical contexts, transpositionally equivalent chords are thought to be similar. Transpositional equivalence is a feature of musical set theory. The terms transposition and transposition equivalence allow the concept to be discussed as both an operation and relation, an activity and a state of being. Compare with modulation and related key.
For pitch class transposition by a pitch class interval:
Twelve-tone transposition [ edit ]
Milton Babbitt defined the "transformation" of transposition within the twelve-tone technique as follows: By applying the transposition operator (T) to a [twelve-tone] set we will mean that every p of the set P is mapped homomorphically (with regard to order) into a T(p) of the set T(P) according to the following operation:
where to is any integer 0–11 inclusive, where, of course, the to remains fixed for a given transposition. The + sign indicates ordinary transposition. Here To is the transposition corresponding to to (or o, according to Schuijer); pi,j is the pitch of the ith tone in P belong to the pitch class (set number) j.
Allen Forte defines transposition so as to apply to unordered sets of other than twelve pitches:
- the addition mod 12 of any integer k in S to every integer p of P.
thus giving, "12 transposed forms of P".
Fuzzy transposition [ edit ]
Straus created the concept of fuzzy transposition, and fuzzy inversion, to express transposition as a voice-leading event, "the 'sending' of each element of a given PC [pitch-class] set to its Tn-correspondent...[enabling] him to relate PC sets of two adjacent chords in terms of a transposition, even when not all of the 'voices' participated fully in the transpositional move.". A transformation within voice-leading space rather than pitch-class space as in pitch class transposition.
See also [ edit ]
Sources [ edit ]
- Schuijer, Michiel (2008). Analyzing Atonal Music, pp. 52–54. ISBN 978-1-58046-270-9.
- Rahn, John (1987). Basic atonal theory. New York: Schirmer Books. pp. [, page , needed], . ISBN 0-02-873160-3. OCLC 54481390.
- Babbitt (1992). The Function of Set Structure in the Twelve-Tone System, p. 10. PhD dissertation, Princeton University . cited in Schuijer (2008), p. 55. p = element, P = twelve-tone series, i = order number, j = pitch-class number.
- Forte (1964). "A Theory of Set-Complexes for Music", p. 149, Journal of Music Theory 8/2:136–83. cited in Schuijer (2008), p. 57. p = element, P = pitch class set, S = universal set.
- Straus, Joseph N. (April 11, 2003). "Voice Leading in Atonal Music", unpublished lecture for the Dutch Society of Music Theory. Royal Flemish Conservatory of Music, Ghent, Belgium. or Straus, Joseph N. (1997). "Voice Leading in Atonal Music" in Music Theory in Concept and Practice, ed. James M. Baker, David W. Beach, and Jonathan W. Bernard, 237–74. Rochester, NY: University of Rochester Press. Cited in Schuijer (2008), pp. 61–62.